메뉴 바로가기 본문 바로가기

READERS

THE GENERATION DIAGNOSTIC SYSTEM

i-chamber

HOW DOES IT WORK?

The i-chamber is an auxiliary device for the ichroma (ichroma ™, ichroma ™ II) systems and provides an environment set to the correct temperature to the iChroma cartridge when heating is required between tests. You can improve the reliability of your test

STRUCTURE

MOVIE

ADVANTAGE

ADVANTAGE
Interface Expansion of user interface through graphic interface
Display 3.2” TFT Color LCD providing high visibility
Data storage and update Available to store and search large amount of test results (up to 1,000) Test results are easily distinguished from calibrator measurement results Convenient update using ID chip
optical technology Absorbance analysis system
Connectivity Data output available through external printer connection
Convenience Finger-prick and tube blood available (Finger blood collection and pipetting available)

SPECIFICATIONS

SPECIFICATIONS
Dimensions 190 mm (L) x 120.6 mm (W) x 108 mm (H)
Weight 1.5 kg (± 0.3 kg)
Number of cartridge slots 6 (Temperature can be set independently for each slot)
Power supply DC 12 V, 5 A
Data output LCD (16 x 4 characters)
Communication ports Mini USB port (for software upgrade)
Environmental conditions for the operation Temperature and humidity : 15~35°C(59~95oF), Humidity up to 70%, Installation : Dry, clean, flat and horizontal surface in an indoor setting away from direct sunlight, mechanical vibration and electromagnetic field, etc.
Heating/Cooling time - About 10 minutes, when the target temperature (Td) is within 5°C of the ambient temperature - About 1 hour, if the target temperature (Td) is lower than the ambient temperature by 10°C or more

FAQ

  • QCan I set the temperature of the i-Chamber?

    Yes. Press the two buttons simultaneously to set the target temperature, then press the two buttons again to complete the temperature setting.

  • QCan I start testing though temperature does not reach the target?

    No. please turn on the i-Chamber and wait until the target temperature is reached. Test should be carried out when the i-Chamber provides a constant temperature condition.

  • QCan I set the reaction time of the i-Chamber?

    Yes. Press the right button for 3 seconds, set the reaction time, and press the two buttons simultaneously to complete the time setting.

Product News

  • Products
  • Title
  • Attachment
  • Date
  • No posts.
1
El Zain International Comapny. | 20 Ibn Al Walid Ninth floor Ad Doqi, Giza Governorate
T. 00201203332237 | T. 00201203332238

Copyright Ⓒ El Zain International Comapny. All rights reserved.